Fire Glass
Supply and Installation of Accredited, Integrity Only and Integrity and Insulation Fire Glass Protection
We are Fire Glass technical experts and are available to advise on the best glass type for your building with our fully trained Fire Glass Glaziers on hand to assist you with your installation.
Fire glass presents a modern architectural alternative, allowing sense of space and light in residential and commercial environments without compromising safety.
Levels of protection, as designated by the European Standards, are measured in defined time periods;
- 30 minutes Integrity and Insulation 30 minutes integrity only
- 60 minutes Integrity and Insulation 30 minutes Integrity Only
- 90 minutes Integrity and Insulation 90 minutes Integrity Only
- 120 minutes Integrity and Insulation 120 minutes Integrity and Insulation
- 180 minutes Integrity and Insulation 180 minutes Integrity and Insulation
Our fire glass fulfils the requirements set by building regulations authorities and international fire test standards EN14449.
Fire glass is available for use with; doors, partitions, facades, roof glazing, sliding doors and windows.
Our fire glass fulfils the requirements set by building regulations authorities and international fire test standards EN14449.
Fire glass is available for use with; doors, partitions, facades, roof glazing, sliding doors and windows.
Integrity and Insulation Fire Glass
This glass offers the maximum level of protection when designed for use in emergency exits, stairwells, floors and roofs. It achieves full thermal insulation with approximately 2% of heat transferring after 30 minutes for external and internal fire grade units.
Integrity and Insulation Fire Glass
This glass offers the maximum level of protection when designed for use in emergency exits, stairwells, floors and roofs. It achieves full thermal insulation with approximately 2% of heat transferring after 30 minutes for external and internal fire grade units.
Pilkington PyroStop®
We are approved stockists of Pilkington Pyrostop ® Fire Glass suitable for external and internal use. It is the accredited fire glass solution for protection from, heat, flames and hot gas.
Offering integrity and insulation, this laminated, impact resistant glass will provide protection up to Class 1 of BS EN 12600. Please note this level of protection is dependent on the thickness of the glass.
Pilkington Pyrostop ® offers vital, passive fire protection with optimum natural light quality and is the fire glass solution of choice for complete physically robust and fire shield glazing combination. In the event of fire Pilkington Pyrostop ® turns a cloudy, white opaque and provides an insulated barrier against flames, gases and heat.
Designed to provide; passive protection against fire to aid escape and fire-fighter access; to prolong the spread of fire through a building and onto neighbouring buildings; building regulation fore protection where required.
Fire Test Summaries for Pilkington Pyrodur® are available HERE
Pilkington Pyrostop ® applications include:
- Fire Glass Insulated Units
- Commercial Fire Glazing
- Fire Screen Glazing
- Integrity and Insulation Glazing
- Structural Fire Glass Installations
Pilkington Pyrodur®
We are approved stockists of Pilkington Pyrodur ® Fire Glass suitable for use in hard and softwood slim, light, timber frame profiles, steel aluminium and fire rated composite frames for external and internal applications.
Pilkington Pyrodur® offers up to 60 minutes integrity only, passive fire protection. It can combine impact and penetration resistance required in Document Q and Secured by Design applications if required.
Pilkington Pyrodur® benefits from 15 minutes insulation but is not recognised as a registered insulation property fire glass. If you require Integrity and Insulation Fire Glass, we recommend Pilkington Pyrostop ®
Fire Test Summaries for Pilkington Pyrodur® are available HERE
Pilkington Pyrodur ® applications include:
- Fire Doors
- Fire Glass Partitions
- External and Internal Integrity Fire Glazing
- Building Regulation Fire Glass – Sealed Units
PLEASE NOTE
To ensure the expected fire performance is achieved, should it be called upon, fire or heat-resistant glass must always be specified as part of a tested and approved glazing system and installed by specialists. Cornwall Glass is a Pilkington Glass approved partner.
Visit the Pilkington Online Specifire Page to select your glass.
01392 364364 Exeter@cornwallglass.co.uk
7-10 Bittern Units, Bittern Road, Sowton Industrial Estate, Exeter, EX2 7LW
0117 9710101 Bristol@cornwallglass.co.uk
Units 1-3, 306 Broomhill Road, Brislington, Bristol, BS4 5RG
01752 605500 PlymouthTC@cornwallglass.co.uk
3 Beechwood Way, Langage, Plymouth, PL7 5HH
01935 412300 Yeovil@cornwallglass.co.uk
22 Garrett Road, Lynx Trading Estate, Yeovil, BA20 2TJ
01872 276697 Truro@cornwallglass.co.uk
Glasteinan House, Tabernacle Street, Truro, TR1 2EJ
01326 375124 Penryn@cornwallglass.co.uk
Commercial Road, Penryn, TR10 8AQ
01736 360174 Penzance@cornwallglass.co.uk
Poniou Way, Longrock Industrial Estate, Penzance, TR20 8HX
01209 211028 Redruth@cornwallglass.co.uk
85 Higher Fore Street, Redruth, TR15 2AR
01637 873233 Newquay@cornwallglass.co.uk
12 Pargolla Road, Newquay, TR7 1RW
